Compliance Documentation

Certifications & Product Documentation

Certification and compliance documentation can depend on the product, model, configuration and destination market. Customers should confirm the applicable document and current version for the equipment being purchased.

This page reproduces information stated on the document files shown below. It does not extend a document to products, models or configurations that are not named in that file.

Documentation Categories

Documents currently shown on this page

The categories below reflect the four supplied document images. Referenced test-report numbers are listed where the document itself provides them; a referenced report is not presented as a separately available file unless confirmed by YIDIMU.

Product Safety

Certificate of Conformity

The supplied document states General Product Safety Regulation (EU) 2023/988 and EN IEC 62368-1:2024+A11:2024.

EMC

EMC Certificate of Conformity

The supplied document states EMC Directive 2014/30/EU and four listed EMC standards.

RoHS

RoHS Certificate of Conformity

The supplied document states Directive 2011/65/EU and amendment Directive (EU) 2015/863, with IEC 62321 test standards.

FCC Part 15 B

Supplier’s Declaration of Conformity

The supplied document is titled “Supplier’s Declaration of Conformity.” It is not presented here as an FCC-issued grant or FCC certification.

Verified Document Index

Document details and stated scope

Only fields visible in the supplied files are shown. No expiry date, notified-body status, medical approval or all-product coverage is inferred.

Product Safety Certificate of Conformity

Document title on file: Certificate Of Conformity

Applicant
Shenzhen Yidimu Intelligent Technology Co., Ltd.
Manufacturer
Shenzhen Yidimu Intelligent Technology Co., Ltd.
Product
LCD 3D Printer
Document No.
BAC260490138S
Regulation stated on document
General Product Safety Regulation (EU) 2023/988
Standard
EN IEC 62368-1:2024+A11:2024
Referenced Report No.
B2604TR90138S
Issuing Organization
Shenzhen Bory Technology Service Co., Ltd.
Issue Date
April 23, 2026
Applicable Models Stated on Document
Eternal D1, Eternal Y8, Eternal M1, Eternal M2, Eternal L8, Flex G1, Flex G1 pro, Flex G2, Flex G2 pro, Flex G3, Flex G3 pro, Flex G4, Flex G4 pro

Scope note: The document states that validity is limited to the equipment and configuration described together with the referenced test data. This page does not characterize this file as an LVD certificate.

EMC Certificate of Conformity

Document title on file: Certificate Of Conformity

Applicant
Shenzhen Yidimu Intelligent Technology Co., Ltd.
Manufacturer
Shenzhen Yidimu Intelligent Technology Co., Ltd.
Product
LCD 3D Printer
Document No.
BAC260490138E
Directive
EMC Directive 2014/30/EU
Referenced Report No.
B2604TR90138E
Issuing Organization
Shenzhen Bory Technology Service Co., Ltd.
Issue Date
April 20, 2026
Standards
EN 55032:2015+A1:2020; EN 55035:2017+A11:2020; EN IEC 61000-3-2:2019+A2:2024; EN 61000-3-3:2013+A2:2021
Applicable Models Stated on Document
Eternal D1, Eternal Y8, Eternal M1, Eternal M2, Eternal L8, Flex G1, Flex G1 pro, Flex G2, Flex G2 pro, Flex G3, Flex G3 pro, Flex G4, Flex G4 pro

Scope note: The document states that validity is limited to the equipment and configuration described together with the referenced test data. Refer to the document for the applicable product/model and scope.

RoHS Certificate of Conformity

Document title on file: Certificate Of Conformity

Applicant
Shenzhen Yidimu Intelligent Technology Co., Ltd.
Manufacturer
Shenzhen Yidimu Intelligent Technology Co., Ltd.
Product
LCD 3D Printer
Document No.
BAC260490138R
Directive
Directive 2011/65/EU and Amendment Directive (EU) 2015/863
Referenced Report No.
B2604TR90138R
Issuing Organization
Shenzhen Bory Technology Service Co., Ltd.
Issue Date
April 20, 2026
Standards
IEC 62321-1:2013; IEC 62321-2:2021; IEC 62321-3-1:2013; IEC 62321-5:2013; IEC 62321-4:2013+A1:2017; IEC 62321-7-1:2015; IEC 62321-7-2:2017; IEC 62321-6:2015; IEC 62321-8:2017
Applicable Models Stated on Document
Eternal D1, Eternal Y8, Eternal M1, Eternal M2, Eternal L8, Flex G1, Flex G1 pro, Flex G2, Flex G2 pro, Flex G3, Flex G3 pro, Flex G4, Flex G4 pro

Scope note: The document states that the conformity evaluation concerns the named product/EUT and does not imply an assessment of the whole production. It should not be treated as permanent RoHS coverage for every YIDIMU product.

FCC Supplier’s Declaration of Conformity

Document title on file: Supplier’s Declaration of Conformity

Certificate Holder
Shenzhen Yidimu Intelligent Technology Co., Ltd.
Manufacturer
Shenzhen Yidimu Intelligent Technology Co., Ltd.
Product
LCD 3D Printer
Document Number
ZKT-260417L1132C
Test Standard
FCC Part 15 B; ANSI C63.4:2014
Referenced Test Report
ZKT-260417L1132E
Issuing Organization Named on Document
Shenzhen ZKT Technology Co., Ltd.
Issue Date
April 20, 2026
Applicable Models Stated on Document
Eternal D1, Eternal Y8, Eternal M1, Eternal M2, Eternal L8, Flex G1, Flex G1 pro, Flex G2, Flex G2 pro, Flex G3, Flex G3 pro, Flex G4, Flex G4 pro

Scope note: The file is titled Supplier’s Declaration of Conformity and references a specific test report. This page does not present it as an FCC-issued certification grant. Refer to the document for the applicable product/model and scope.

Certificate / Report Preview

Open the supplied document images

Each preview opens the original image file in a new tab. Where a file references a test report, request that report separately and confirm that it applies to your product and order.

Certificate of Conformity for YIDIMU LCD 3D printers referencing EU 2023/988
Product Safety Certificate of ConformityDocument No. BAC260490138S
EMC Certificate of Conformity for listed YIDIMU LCD 3D printer models
EMC Certificate of ConformityDocument No. BAC260490138E
RoHS Certificate of Conformity for listed YIDIMU LCD 3D printer models
RoHS Certificate of ConformityDocument No. BAC260490138R
FCC Part 15 B Supplier's Declaration of Conformity for listed YIDIMU LCD 3D printer models
FCC Supplier’s Declaration of ConformityDocument No. ZKT-260417L1132C

The preview files are provided for document identification and scope review. A website preview should not replace the complete current documentation required for a specific shipment, market or conformity assessment.

Important Documentation Note

Document scope can vary by model, configuration, destination market and order. Do not assume that a document for one model, configuration or product family automatically covers another.

The CE-related files shown on this page are documents issued by the organization named on each file. YIDIMU does not present those organizations here as EU notified bodies, and this page does not describe CE marking as approval by an EU authority. The FCC file is presented according to its stated title: Supplier’s Declaration of Conformity.

For regulated, dental, medical, body-contact, food-contact or other special applications, confirm the specific product, material, intended use and documentation requirements applicable in the destination market before purchase or use.

Before Ordering

Confirm the documentation you actually need

Include these details in your inquiry so the applicable document can be checked against the proposed equipment and destination.

  • Exact product model
  • Destination market
  • Required standard or regulation
  • Required document type

FAQ

Documentation questions before purchase

These answers are intentionally scope-specific. They do not turn a listed document into blanket coverage for every YIDIMU product or market.

Are all YIDIMU printers covered by the same certificates?

No. The documents shown on this page name a defined set of LCD 3D printer models. Do not assume that a different model, product type or configuration is covered unless it is identified in the applicable document. Refer to the document for the applicable product/model and scope.

How can I confirm a certificate applies to my model?

Match your exact model against the model list on the document, then check the stated directive, regulation or standard, document number, referenced report number and scope note. For a purchase, request confirmation of the current applicable document for your model and configuration.

Can I request documentation before ordering?

Yes. Contact YIDIMU or submit a request for quotation with the exact model, destination market and required document or standard. The team can then confirm which current documentation is applicable and available for the proposed order.

What is the difference between a certificate and a test report?

They are different documents. A Certificate of Conformity summarizes the conformity statement and identifies items such as the product, models, standards and referenced report. A test report records the testing or evaluation performed for the tested sample or configuration. One should not be relabeled as the other.

Can documentation requirements vary by destination market?

Yes. Applicable regulatory and documentation requirements can depend on the product and the market where it will be supplied or used. Confirm the destination market and required documentation before ordering rather than relying on a document intended for another market.