操作步骤详解:
1.请带上棉布手套和橡胶手套;
Gloves and cotton gloves, please
2.断开3D打印机电源;
Power off the 3D printer
3.废液盘能有效避免地板污染;
Waste liquid tray can effectively avoid floor pollution
4.拧松打印平台螺丝,取下打印平台;
Loosen the screws of the printing platform and remove the printing platform
5.拧下料槽固定螺丝,取下料槽;
Screw out the fixing screw of the chute and remove the chute
6.使用酒精和无尘布清洁打印平台树脂和脏污;
Use alcohol and a clean cloth to clean the resin and dirt on the printing platform
7.使用配套工具,拧松打印平台四颗固定螺丝;
Use the matching tools to loosen the four fixing screws of the printing platform
8.安装打印平台,拧紧大螺丝;
Install the printing platform and tighten the big screw
9.接通打印机电源;
Turn on the printer
10.放入调平膜到打印屏上;
Put the leveling film on the print screen
11.按下开机键,打印机开机;
Press the power on key to turn on the printer
12.依次点击“工具–手动–小房子图标”;
Click the “tools – Manual – small house icon”
13.z轴开始自动归零;
Z axis starts to return to zero automatically;
14.左手用力按住打印平台;
Press and hold the printing platform with your left hand
15.右手拧紧固定螺丝;
Tighten the fixing screw with the right hand;
16.拉扯调平膜,当四角阻力一样紧,说明调平成功;
Pull the leveling film, when the four corner resistance is the same, the leveling is successful;
17.按下上升键,适当上升Z轴;
Press the up key to raise z-axis appropriately
18.返回主界面,并关机。
Return to the main interface and shut down.