操作步骤详解:
1.请带上棉布手套和橡胶手套;
Please wear the cotton gloves and rubber gloves;
2.橡胶手套能防止树脂过敏;
Rubber gloves can prevent from resin allergy;
3.这是打印机主机;
This is the printer;
4.这是打印平台;
This is the printing platform;
5.这是料槽;
This is the resin tank;
6.这是工具盒;
This is the tool box;
7.组装电源线;
Assembling the power cord;
8.接通电源;
turn on the electricity;
9.按下开机键,打印机开机;
Press the power on key to turn on the printer;
10.依次点击“工具-手动-向下”检查z轴;
Click “tools – Manual – down” to check the z-axis;
11.z轴跟随指令运动,说明正常;
The z-axis follows the command movement, indicating that it is normal;
12.返回主界面,依次点击“工具-校正-下一步”;
Return to the main interface and click “tools – correction – next” in turn;
13.当触摸屏和打印屏都显示矩形框,说明打印屏正常;
When the touch screen and print screen display rectangular box, it indicates that the printing screen is normal;
14.立即点返回,保护打印屏;
Click back immediately to protect the print screen;
15.安装打印平台,拧紧固定大螺丝;
Install the printing platform and tighten the big screw;
16.安装料槽,拧紧左右固定螺丝;
Install the resin tank and tighten the left and right fixing screws;
17.倒入料槽1/2树脂,模型大可中途加料;
Pour 1 / 2 resin into the resin tank,if printing the big model,you can refill the resin halfway;
18.插入拷贝模型文件的U盘;
Insert the USB flash disk that included the model file;
19.返回主界面,点击“打印”;
Return to the main interface and click “print”;
20.找到需要打印的文件,点击右边“三角形”按钮打印;
Find the print file and click the “triangle” button on the right to print it;
21.打印机将自动打印模型,时间会显示在屏幕上;
The printer will print the model automatically and the time will be displayed on the screen;
22.打印完成,点击“确定”返回主界面;
After printing, click “OK” to return to the main interface;
23.依次点击 “工具-手动-向下”;
Click “tools – Manual – down”;
24.下降Z轴方便取出打印平台;
Drop the z-axis to take out the printing platform easily;
25.取打印模型一定要用废液盘;
Please use the waste tank to take the printing model;
26.废液盘接住废液;
The waste tank catches the waste resin;
27.需要酒精、铲刀、无尘布;
Need alcohol, blade, dust-free cloth;
28.喷酒精清洁模型;
spray the alcohol to clean the model;
29.使用铲刀铲下模型;
Remove the model with a blade;
30.使用剪刀剪去打印支架;
Use scissors to cut out the print support;
31.经过打磨上色,模型非常精美;
After polishing and coloring, the model will become beautiful.