操作步骤详解:
1.清洁料槽和离型膜,方便下一步操作;
Clean the resin vat and FEP film to facilitate the next operation
2.使用配套工具拧开螺丝;
Use the matching tools to loosen the screws
3.向外顶,推开固定框和旧离型膜;
Push the retaining frame and the old FEP films away from the top
4.使用酒精清洁料槽和固定框;
Use alcohol to clean the resin vat and fixed frame
5.平整放置新离型膜;
Place the new FEP film flat
6.注意:固定框和料槽对好位置;
Note: the fixed frames and the resin vats are aligned
7.对角安装螺丝,八分紧方便后期调整;
Diagonal mounting screws, easy to adjust it later,when it reachs 80% tight
8.固定好离型膜,再最终拧紧螺丝;
Fix the FEP films, and finally tighten the screws
9.确保底面离型膜平整;
Make sure the bottom of FEP film is flat
10.使用美工刀割去外围多余离型膜;
Use a art knife to cut off the excess FEP films
11.左右固定螺丝孔 离型膜破洞;
Fix the screw holes to avoid holeing in the FEP films
12.离型膜更换完成;
The FEP films are replaced completely.